WWW_Belarus

Home

Discussion Forum

Belarus.NET > Belarus Information Network

BELARUSREZINOTECHNICA

Products

CRUSHED RUBBER up to TU 38. 00149438 -48 -92

Crushed rubber is used for manufacturing of hydraulic insulating and building materials.

PD -grade crushed rubber is obtained by grinding worn-out tires and tire tubes made out of generalpurpose rubber and tread rubber.

Crushed rubber conforms to the following specifications.

____Characteritic ____________________________________Value

Cordage finre (viscose and kapron)

fraction of total mass, %, max ...............................................................9,0

Water fraction of total mass,% ,max ...................................................1,50

Sleved rubber fraction of total mass,% ,min .......................................100

Ferrous metal particles fraction of total mass

(after magnetic separation),% , max .....................................................0,1

RUBBER GLUEING MASTIC KH-2 up to GOST 24064-80

Rubber glueing mastic is used for glueing of rubber linoleum, rubber plates, hermetic sealing gaskets.

Mastic KH-2 is sticky pasty mass manufactured by dissolving of rubber stock and ingredients in petrol or ethylacetate.

The manifactured mastic KH-2 is casked or canned and is transported to the stock-room where it is stored at temperatures ranging from 5 up to 30 grad C and a conditions which exclude their ignition or self-ingntion.

The mastic KH-2 should be stored far from heat sourses no longer than 2,5 months.

ADHESIVE (GRADE 2572) up to TU 38 105758-79

Adhesive grade 2572 is used for glueing together of non-vulcanized ebonite with metals during vulcanisation.

Adhesive is produced by dissolving rubber stock, type 2572, in rubber-solvent BR-1 or BR-2.

Adhesive should be stored in hermetically sealed containers, in the room designed for 0 (up to +25 grad C, at 1,5 meters' distance from heaters.

The adhesive canbe transported by any means of transport provided all safety regulations for inflammable materials are fulfilled.

The guaranty storage term is 3 months from the manufacture date.

ADHESIVE (GRADE 4010) up to TU 38 105517-86

Adhesive grade 4010 is designed for glueing together of vulcanized rubber, textille, board with painted and non-painted metals at temperatures of 23+/-5 grad C and for sealing of car windows.

Adhesive 4010 is produced by dissolving of rubber stocks on the basis of natural or reclaimed rubber in petrol.

Adhesve can be transported at minimum temperature of -40 grad C, before using adhesive should be kept in the room up to temperature of 25+/-5 grad C.

Adhesive is stored in hermetically sealed containers at temperatures from 0 up to 25 grad C in special room.

The guaranty storage term is 2 months from the manufacture date.

MOLDED RUBBER FOAM ARTICLES up to GOST 25640-83

0st 38 0692-83

Vulcanized rubber foam with high absorption propertias is used for production of rubber foam articles.

GOST .......... TEMPERATURE ....................FIELD of .............STORAGE

..........................conditions ..........................application ...............term

GOST .......from -45 to 70 grad C .......as parts of machines ..... 12 months

25640-83 ..................................................and equipment

OST ...........from 0 to +35 grad C ..........For production of ...........6 months

38. 0693-83 .........................................softelements of furniture ...

Attention !!! INTERNET RECREATION is Maintained by the Russian Emigrants at the "GUSARSKY KLUB" (only the Russian language by the LATIN LETTERS, for example: Ja ochenj rad videtj Vas - A'm very glad to see you)

This page was especially prepared for our future sponsors

***

TEAM ll HOME ll GENERAL ll SEARCH RUSSIA ll SEARCH EASTEAN BLOCK ll CHURCH ll SPONSORS ll INVESTMENT PROPOSITION ll BUSINESS&ECONOMICS ll GALLERY ll INDEX